全國統一熱線：021-32205893
意大利VIS SVR0.S08閥門系列
SAE墨盒 - 350巴
NC單鎖先導操作 - 提升式
描述
電磁操作，2路2位，常閉，先導
提升式，旋入式插裝閥。
通常用作高壓的阻塞或負載保持裝置
電路。 當線圈斷電時，SVR0.S08作為檢查
閥門允許自由流量從2到1，而阻塞從1到2。
當線圈通電時，提升閥抬起并打開1至1
2和2到1個流動路徑。
采用單件式車身的剛性設計有助于大限度地減少車身
腔內偏心的影響，提供了很大的可靠性。
優化的流路可降低壓降。
技術特點
所有外表面均鍍鋅，耐腐蝕。
所有閥門部件均由高強度鋼制成。 提升得以硬化
和磨削，確保小的磨損和延長的使用壽命。
線圈密封保護電磁閥系統。
手動覆蓋選項。
工業SAE共同腔。
VIS插裝閥SVR0.S08.00.F00技術特點
SAE Cartridge - 350 bar
NC Single Lock Pilot Operated - Poppet Type
Description
Solenoid operated, 2-way 2-positions, normally closed, piloted
poppet type, screw-in cartridge valve.
Typically used as a blocking or load holding device for high pressure
circuits. When the coil is de-energized, the SVR0.S08 acts as check
valve allowing free flow from 2 to 1, while blocking from 1 to 2.
When the coil is energized the poppet lifts and opens both the 1 to
2 and the 2 to 1 flow paths.
The rigid design using a 1-piece body contributes to minimize the
effect of eccentricities in cavity and provides great reliability.
Low pressure drop thanks to optimized flow path.
Technical Features
All external surfaces are zinc plated and corrosion-proof.
All valve parts are made of high strength steel. Poppet is hardened
and ground to ensure minimal wear and extended service life.
Coil seals protect the solenoid system.
Manual override options.
Industry SAE common cavity.
VIS插裝閥SVR0.S08.00.F00技術特點
|
||
|
||
 |
